9 Best Welding Gloves (2020) for Mig, Tig & Stick

About this Article: Hi, I’m Chris I run this website! This information is shared as examples only and stated as personal opinion for our circumstances. It does not constitute advice, professional or otherwise, to you and your circumstances, or guarantee quality or fit for purpose of the following products. By visiting and using this website, you accept and agree to be bound by our Disclaimer along with our Terms and Conditions and Privacy Policy posted on the website. As an Amazon associate we earn from qualifying purchases.

Our Pick (Best Value for Money)

Miller Electric 13 Inch Welding Gloves


We selected these Miller Electric 13 Inch welding gloves as the best value for money choice. We think the thick cowhide exterior and Kevlar stitching are top quality and the gloves are from a top brand in the industry. These are probably best for MIG and Stick welding.

For a pair for TIG welding, we’d lean more toward the Caiman White Goatskin pair instead.

Welding can cause significant burns to your skin (and potentially even lead to fires!) That’s why important to wear protective gloves and put down a fireproof welding blanket every time you weld.

In this article, we’ve put together our choices for the best welding gloves. In our opinion, the best gloves for welding are:

  • Miller Electric 13 Inch Welding Gloves – Best Value for Money
  • WZQH 16 Inch 932F Leather Forge Welding Gloves – Best for MIG and Stick Welding
  • Caiman One Size Fits All Deerskin Welding Glove
  • MAGID Inferno Series Welder’s Gloves
  • Lincoln Electric Traditional MIG/Stick Welding Gloves
  • Caiman White Goatskin, Long Cuff, Welding-Tig/Mig – Best for TIG Welding
  • US Forge 400 Welding Gloves
  • IRONCLAD Welding Leather Gloves
  • Rapicca Leather Forge Welding Gloves

Note that these are examples selected for our circumstances, and do not represent advice to you or your circumstances, professional or otherwise. Welding gloves must be used with caution and do not guarantee protection from burns.

Best Welding Gloves – Top 5 Compared

#

Welding Gloves

Quick Review

Our Rating

1. Miller Electric 13 Inch Welding Gloves Miller is one of the best welding glove brands on the market today and this pair of gloves are very popular among welders. (Check Today’s Price on Amazon)

9/10

2. Caiman White Goatskin Welding Gloves This is the best pair of welding gloves for dexterity in our opinion, but the heat and burn protection isn’t amazing as they’re quite thin. (Check Today’s Price on Amazon)

8.5/10

3. Caiman One Size Fits All Deerskin Welding Glove We love the long cuffs of this model to protect the fore arm. They also deliver on good flexibility. (Check Today’s Price on Amazon)

8.5/10

4. Lincoln Electric Traditional MIG/Stick Welding Gloves These are a well loved pair of workaday gloves that are popular in the industry. (Check Today’s Price on Amazon)

8/10

5. Ironclad Welding Leather Gloves This brand offers a good range of sizes and sizing chart; but there isn’t an aluminum mid-layer which we wish there was. (Check Today’s Price on Amazon)

8/10

9 Welding Gloves Reviewed 

1. Miller Electric 13 Inch Welding Gloves – Best Value for Money

Quick Review: Miller is one of the best welding glove brands on the market today and this pair of gloves are very popular among welders.


Miller is a brand with an incredibly good reputation when it comes to welding gear.

This pair of Miller gloves are one of their lower price point pairs, but are still at a quality that we’re happy to recommend. They’re designed for Heavy-Duty MIG/Stick Welding.

The exterior is cowhide leather with a pigskin palm allowing for added dexterity in the hand. And of course the stitching is Kevlar. 

There’s the option to choose between Large and XXL. We’ve heard they run a little small in their sizes, which is something worth keeping in mind.

The 5 inch cuff is okay but not the best in the industry. It all depends on whether you like longer cuffs. At times long cuffs can get it the way and just bunch up your clothing, other times people prefer it – we can’t make that decision for you.

Why These Gloves

Keep in Mind

Brand Name: Miller is known for being a high quality welding glove brand.

Medium Cuff Length: Many people would consider the 5 inch cuff to be not too long, not too short.

Size Choice: It’s possible to choose between L and XXL.

Good Color: We hate white for welding gloves. This black and blue color is way better.

Not the Cheapest: We think Miller’s price point is fair for the quality, but you can get cheaper.

2. WZQH 16 Inch 932F Leather Forge Welding Gloves – Best for MIG and Stick Welding

Quick Review: Overall this is a nice pair of thick, affordable and strong gloves for resisting flames.


These one-size-fits-most welding gloves are extra thick, with three layers:

  • a top layer of genuine cowhide split leather (we prefer cowhide over goat skin for fireproof gloves),
  • an aluminum mid-layer for fire resistance, and
  • a soft insulated cotton lining.

To hold this all together, the stitching is Kevlar which is fire resistant.

Something we really like about this pair is the reinforced double leather stitching on the palm of the hand to protect that extra vulnerable part of your body.

The sleeve comes in at 7.5 inches long which is longer than most.

The manufacturer recommends this pair for stick welding (SMAW), Mig welding (GMAW), and Flux-Core welding (FCAW).

To wrap it all together, there’s a hanging hook for hanging the gloves when they’re not in use!

Overall, a pretty nice pair.

Why These Gloves

Keep in Mind

Affordable: Actually, really affordable.

Aluminum Layer: We look for an aluminum fire resistant layer in quality welding gloves.

Strong: The cowhide leather exterior is very thick and the reinforced palm is a nice addition.

One Size Fits Most: Most is the operative term – some people with extra small hands might struggle.

Small Hands won’t Fit: Beware that it’s not really one size fits all – tiny hands might struggle.

3. Rapicca Leather Forge Welding Gloves

Quick Review: These gloves have all the right specifications for us at a very good price point. Too good to be true? Some say yes.


When we first saw these gloves we thought they would be excellent. They tick so many of our boxes. And for a great price!

They have a cowhide leather exterior with Kevlar stitching (more on that later), an aluminum mid-layer for heat protection, and added padding on all the right wear points.

They’ve also got nice long cuffs.

And lastly, we also liked the color – it’s darker so it won’t get all gross like the white ones do.

Excellent!

Then we researched a little more widely. And it turns out a few people have complained about both the stitch quality and the thinness of the outer leather layer.

So, we’re not saying this isn’t a good pair of gloves (it ticks our boxes!), but we’re a little weary after we’ve heard enough others complain about them.

Why These Gloves

Keep in Mind

Long Cuffs: We like the cuff length. They’re long, but not too long.

Aluminum mid-layer: This is great for added heat protection.

Nice Color: We like blue or dark colors for welding gloves.

Great Price Point: The brand has managed to get this down to a reasonable price.

A lot of Complaints: We’ve seen and heard a few people complain about these gloves, which makes us weary.

4. Caiman One Size Fits All Deerskin Welding Glove

Quick Review: We love the long cuffs of this model to protect the fore arm. They also deliver on good flexibility.


Caiman is a respected brand for welding gloves and they have some very avid followers.

The biggest selling point for is is the dexterity of these gloves. Caiman have created these gloves with their ‘Kontour’ design – which essentially means they’ve stitched them in a way to give you maximum dexterity when gripping your tools.

They’re created with deer skin exterior and all Kevlar stitching, which is what we’d expect from a pair of welding gloves.

The other great element of these gloves is the very long cuffs. The gloves are 21 inches end to end, almost reaching up to your elbow. This is great for added protection, but keep in mind it might get hot under there with so little breathing space.

These gloves will be decent enough for everyday welding protection from ambient heat and should withstand brief accidental touch burns – so they’re a perfectly usable workaday pair of welding gloves for our circumstances. 

Why These Gloves

Keep in Mind

Long Cuffs: The gloves are 21 inches end to end, reaching almost up to your elbow.

Dexterity: They’re designed with dexterity in mind, particularly in the palm so you can grip more easily.

Additional Support: The main wear points have additional patches to provide for longer glove lifespan.

Price: Caiman gloves are usually tad more expensive than many competitors, but they’re also a much more well known brand in the space.


5. Lincoln Electric Traditional MIG/Stick Welding Gloves

Quick Review: These are a well loved pair of workaday gloves that are popular in the industry.


This pair of Lincoln gloves are very popular among welders. Plus, they look pretty cool.

They’re designed with a cowhide leather outer layer and kevlar stitching, so we would hope they do okay for withstanding operating temperatures, but won’t withstand directed touch to hot iron for too long. 

Lincoln recommends them for Stick welding (SMAW), Mig welding (GMAW), Flux-Core welding (FCAW).

The usability is a little limited. You can’t choose your size as it’s “one size fits most“. They’re also going to be quite a bit stiffer than goat skin gloves purely because cowhide is less flexible.

Lastly, we’ve heard that the liner quality in these ones leaves a bit to be desired. If a strong, soft liner is a pinch point, we’d give these ones a miss.

Why These Gloves

Keep in Mind

Great Look: We love the fire design on the outside.

One Size fits Most: We think this is a good choice for a shop that needs a pair of gloves to be shared around.

Not for Small Hands: People with small hands may prefer a pair where they can pick the size at the checkout.

6. Ironclad Welding Leather Gloves

Quick Review: This brand offers a good range of sizes and sizing chart; but there isn’t an aluminum mid-layer which we wish there was.


This pair is built with a cowhide leather exterior and foam insulation layer for fire resistance.

There are some definite pros to this pair.

For example, this pair would be quite nicely heat resistant as it has a combination of cowhide leather and Kevlar stitching.

We also think the 10 inch safety cuff is great – nice and long for protecting further up the arm than competitors. We always think shorter cuff gloves are a bit sketchy for heat resistant tasks.

There is also a reinforced elkskin leather palm to give added palm protection at that valuable spot.

And really importantly for online purchases – there’s a great sizing chart on the Amazon seller’s page. So buyers will be able to get the pair that fits their hands best, which is a really nice thing when buying gloves.

Why These Gloves

Keep in Mind

Choice of Sizes: We like that you actually get to choose your size, unlike the “one size fits most” type gloves.

Extra Reinforced Palm: The palm is reinforced with elkskin for added protection.

Extra Long Cuff: The 10 inch cuff goes a long way up your arm for really nice protection.

No Aluminum Layer: We don’t like that there isn’t an aluminum mid layer for added fire protection.

7. Caiman White Goatskin, Long Cuff, Welding – Best for TIG welding

Quick Review: This is the best pair of welding gloves for dexterity in our opinion, but the heat and burn protection isn’t amazing as they’re quite thin.


This pair uses goat skin as its external layer, which is a lot thinner and more flexible than cowhide leather, so we think you’ll find you have a lot of dexterity with this pair than some others. And that’s the main drawing card.

The sleeve is also an appropriate length in our opinion so if the user is wearing decent gear on their body and arms, they can help protect themselves from rogue sparks.

Frankly, though, we think they’d be good for withstanding the ambient heat of welding but we wouldn’t recommend directly touching a hot iron with these!

The other thing we thought was weird was that they’re white. It’s not a great color for a pair of gloves that you’re going to get dirty – fast. They’ll end up looking really scruffy. But I guest welding isn’t a fashion show!

Why These Gloves

Keep in Mind

Not Stiff: The thin goat skin is great for dexterity – they’re not stiff at all.

Affordable: They’re a great price.

Choose your Size: They come in Medium, XL and L.

They’re Thin: The dexterity that you get is traded off for the fact they’re thin and won’t be great protection for direct touches on hot iron.

They’re White: Why white!? Not a nice color for things you’ll get dirty.

8. MAGID Inferno Series Welder’s Gloves

Quick Review: These appear to be a short, comfortable pair of welding gloves. Our main concern is the cuff length which is quite short


This pair of gloves are made of goat skin, which gives added dexterity above and beyond cowhide leather. This gives them a supple, comfortable feel. But, the thinness here also means they’re better for tig than hotter welding in our opinion.

We also like that they’re specifically designed to be cuff resistant – but let’s be honest, any leather glove should be cuff resistant!

We think the cuff is okay but it’s not super long and we prefer welding gloves with longer cuffs for more protection in that area.

Something that did annoy us is the white exterior – we’re not sure why white is used so often for welding gloves? White gets dirty so quickly – darker colors are way nicer.

We also like that buyers can select their size for this pair on a wide sizing scale, so if they’ve got small hands this might be a good option.

Why These Gloves

Keep in Mind

Comfortable: The goatskin leather makes them feel very comfortable and supple.

Size Choice: Buyers can choose between several different sizes on their wide sizing chart.

Not the Thickest: We would be weary about using them for mig welding.

Why White?: We don’t like white gloves.

9. US Forge 400 Welding Gloves

Quick Review: A super cheap burner pair that can be used and abused knowing you didn’t spend too much on them, anyhow.


Our first impression of these gloves was that the name ‘US Forge’ does not mean they are made in the US. They’re made in China.

The best thing about these gloves is the price – they’re really cheap. They are the sort of pair that can just be burned through in a couple of months.

But in terms of quality, it seems there’s a lot to be desired. The gloves would likely protect the user from accidental burns for a short amount of time, but they don’t have that fire resistant mid-layer that we look out for and we definitely wouldn’t use them for high-heat welding.

Nonetheless they are likely to withstand the ambient heat of welding or short accidental touches with a hot surface.

This is definitely a ‘wear them and abuse them’ set of gloves for someone who wants to spend the least they can on a pair of gloves.

Why These Gloves

Keep in Mind

Very Affordable: The price point is nice and low for these.

Use and Abuse Them: This is a burner pair for people who want to wear them for a few jobs then toss them.

No Aluminum Mid Layer: Without an aluminum mid-layer the pair aren’t great value.

Made in China: We think it shows.

Frequently Asked Questions

What we look for in Welding Gloves

1. Protection. We think the gloves should provide protection from heat and sparks. Protection in welding gloves is usually achieved through a combination of a leather exterior and hidden Kevlar stitching.

2. Dexterity. We think the gloves should allow users to be able to operate their machinery without too much hassle, but also be thick enough to protect users from both ambient head and accidental touch of hot metals. MIG and Stick welding usually requires less dexterity and thicker skin (such as cowhide) while TIG welding usually requires more dexterity and thinner skin (like Goat skin).

3. Comfort. When you’re welding, you’re going to sweat and the gloves will be HOT. Long sleeves are excellent for protection, but also contribute to the build-up of heat under the gloves. Select a sleeve length that you feel is both comfortable and safe.

4. Skin Type. A strong outer layer is necessary for welding, but you also want dexterity for fine motor movements – especially if you’re doing TIG welding. Cowhide, Elk skin or Deer skin is usually best for MIG and Stick welding while Goat skin or Pig skin are common for TIG welding due to their added flexibility.

What gloves should I get for TIG welding?

The TIG process requires thinner gloves that allow users to have more dexterity. This is because you need to use touch and feel much more during TIG welding such as when you’re feeding filler wire. Fortunately TIG (GTAW) welding also tends to have less sparks and flames than other forms of welding so you can often get away with thinner gloves if your risk tolerance is high enough (that’s your call – not ours!). Often, TIG welders like to get goat skin gloves as they’re more flexible than cowhide leather.

What gloves should I get for MIG/FCAW welding?

MIG/FCAW welding has a higher amperage current input and higher ambient heat during your work. You may also notice and more sparks. You’ll need thicker cowhide leather gloves for MIG/FCAW welding for added protection.

What gloves should I get for Stick welding?

Stick welding requires you to fit the electrode frequently on the holder. This requires more dexterity than MIG welding, so you might want a slightly more flexible glove for added dexterity. But keep in mind the heat will be high, so you still need quality leather protection on your hands.

What Types of Leather are on Welding Gloves?

1. Cowhide: Cowhide is common for MIG welders as it’s the thickest and most protective of leathers. On the other hand (yes, that was a pun), TIG welders often don’t like it because it’s too stiff and doesn’t provide enough dexterity for the fine motor movements needed during TIG welding.

2. Goatskin: Goat skin is a flexible leather that’s also quite tough and durable. It can be used for all types of welding – TIG, MIG, and Stick – but is probably most commonly used for TIG welders because of its flexibility and comfort.

3. Elkskin: Commonly used for stick welding, Elkskin is a thin and flexible hide. It provides decent protection, but not quite as much as cowhide.

4. Deerskin: Deerskin is an alternative to cowhide that comes in gloves often designed for MIG welding.

5. Pigskin: Pigskin is typically very thin and allows for a lot of agility. That’s why it’s often used as an alternative to Elkskin for stick welding tasks.

Final Thoughts

In our opinion the best gloves for welding are the Miller Electric gloves. But there are a ton of options!

The thing we keep in mind with welding gloves is that we want to balance heat and fire resistance but also dexterity. We feel this is especially true for TIG welding, where many people prefer the additional dexterity.

We hope this article has been informative. But remember, this article has shared our opinions and a range of examples for our circumstances only, and is based on our online research. It does not constitute advice, professional or otherwise. Your circumstances or experiences will differ from ours. Make sure you do your own research and due diligence and adhere to the rules laid out in our terms and conditions and disclaimer.

Cheers,
Chris